Behringer Ultr-Grapgh Pro - GEQ3102
- Dry Hire - 5.00 per day
Perfect Sound with 2 x 31 Bands
Behringer's new Ultra-Graph Pro is a
high-end, 2-channel graphic equalizer with flexible signal processing
capabilities. This professional sound-shaping tool can be used at live venues
for PA optimization or in the studio to process individual signals or your
stereo mix. The GEQ3102 is also perfect for feedback removal or placing vocals
and instruments in the mix. Last but not least, the Ultra-Graph Pro is a useful
tool for mastering.
Direct Access to All Controls
The Behringer
Ultra-Graph Pro enables you to directly access all functions, allowing
lightning-fast adjustments and precise setting in any situation. All controls
are illuminated and two 12-segment LED displays can be set to monitor input or
output level, helping you to prevent overloading. The sweepable high-pass and
low-pass filters allow "pre-graphic" trimming of the frequency range. After
that, you can get to the heart of the matter with 31 EQ faders per channel for
extensive processing between 20 Hz and 20 kHz. A Range button is included, which
switches the maximum boost/attenuation of all bands between ±12 dB and ±6 dB.
For quick comparison between original and processed signal, the entire EQ
section can be switch on and off via the relay-controlled Audio IN/OUT
button.
Live on Stage: The Ultra-Graph Pro's Natural Environment
Club,
stadium, and concert hall acoustics can vary immensely depending upon their
construction. Even with the best PA system, an engineer often has to fight hard
against poor clarity, dull sound and ill-defined signal positioning. The
Ultra-Graph Pro offers invaluable assistance in adapting the program material to
the current room acoustics. With the GEQ3102, you can achieve dramatically
improvements in signal presence and overall audio quality, optimize your
system's efficiency, and give the audience the kind of sound they expect.
Feedback loops in the monitor system are a breeze to conquer. Just zap the
feedback frequency with maximum attenuation and that feedback is history.
Extremely low frequencies are often cut to avoid low-end feedback, which leads
to muddy sound. Used in the monitor system, the Ultra-Graph Pro cleans up your
monitor sound, making it more transparent and giving you considerably more
headroom. Go ahead and crank up that aux send master. By the way: if you should
ever be surprised by a power-down, the GEQ3102 is automatically switched to
bypass mode. The same relays that take care of this also provide a switch-on
delay to protect your system against dangerous switching
noises.
Ultra-Graph Pro: You're in Control of Your Music's Sound
Spectrum
You want a differentiated audio image for your production? With the
Ultra-Graph Pro, you've got extensive signal processing capabilities. Boosting
or attenuating certain frequencies can accent voices and instruments in the mix.
Next to this classic application, equalizers are often used today for creative
sound design: with extreme settings you can conjure up wild effects that get
your audience's attention. A further application is mastering. Sometimes a mix
sounds a bit out of whack. Using the GEQ3102 in the sum enables you to
manipulate a finished mix by correcting frequency imbalances until the mix
sounds homogenous. No matter which application, the Ultra-Graph Pro helps you
reach your goal: that same professional sound you hear out of top recording
studios.
The Ultra-Graph Pro GEQ3102: perfect sound with 2 x 31 bands!
Copyright(c) 2004 allthekit.com All rights reserved.
Contact@allthekit.com