Proel TFL12P Wedge Monitors - 300 Watts
RMS 600 Watt Peak
   
These are great monitors that
can handle more than enough power needed on stage They can be used
as normal speakers or a wedge monitors for the stage. When we use our
larger rig we take four of these which we power with one of our Yamaha
P7000s Amps. The result is impressive with good clear and load sound
for the musicians on stage.
Here is the more detailed information:
|
Datasheet |
|
System
type : |
2-way vented enclosure |
|
Nominal
Impedance : |
4 ohm |
|
Input power rating
(continuous) : |
300 W |
|
Input power rating
(peak) : |
600 W |
|
Frequency
response : |
55Hz - 18kHz (-6dB,
+6dB) |
|
Sensitivity : |
98dB @ 1W/1m |
|
Maximum (peak)
Output : |
125 dB @ 1m |
|
Low Frequency
Device : |
12'' woofer - 2.5'' voice
coil |
|
High Frequency
Device : |
1'' throat - 1.4'' voice coil
|
|
Coverage Angle H.
(-6 dB) : |
70° |
|
Coverage Angle V.
(-6 dB) : |
70° |
|
Trapezoidal
taper : |
10° |
|
Monitor
Taper : |
48° |
|
Crossover
Frequency : |
2500 Hz |
|
Signal
Processing : |
Proel DSO26 (biamp mode) |
|
Flying
System : |
4 x M10 - top, bottom,
rear |
|
Connectors : |
2 x SPK4MP linked |
|
Construction : |
18mm birch plywood |
|
Finishing : |
Carpet |
|
Cabinet
Colour : |
Black |
|
Mounting
Hole : |
1 x bottom |
|
Weight :
|
18 kg (39.690 lb) |
|
Dimensions (W x H x
D) : |
40 x 60 x 36.5 cm |
Back
to list of Sound Kit
Copyright(c) 2004 allthekit.com All rights reserved. Contact@allthekit.com
|