|
The Xone:32 lets the DJ push the boundaries of performance, with VCF filters, a
tap-programmable low-frequency oscillator and DRS memories giving unprecedented
control over the music (and the crowd).
Features 3 Dual Stereo Channels - Channels have RIAA [RCA] inputs and [TRS] stereo line level inputs, with powerful 3 band EQ. All channels have 3 colour bar meter and gain control, EQ on switch and 60mm fader Mic Channel - XLR input with gain control and 2 band EQ, including HPF. Located on front. Routes direct to mix outputs Stereo Mix Outputs - Balanced mix outputs on TRS with level control, plus secondary RCA pre-fade outputs for recording. The mix signal is displayed on 12 segment 3 colour peak reading bar meters Auxiliary Send - All channels have a post fade stereo auxiliary send, so a program feed to a zone is possible. The outputs are [TRS] jacks 3 Band EQ - Powerful 3 band EQ with 'asymmetric' characteristic; +6dB boost to preserve headroom and -26dB cut for creative mixing VCA Cross Fader - High quality dual-rail gold-contact 45mm fader with contour control, reverse switch and led, plus bypass switch with led. CH1 is routed to X, CH3 is routed to Y, CH2 does not route through the x-fader Transmute Buttons - A unique function which combines 'transform? and 'punch' DJ effects for intelligent and creative live performance. Works in conjunction with x-fader using X & Y buttons VCF Filters with DRS Presets - Choice of High Pass, Band Pass, Low Pass or multiples e.g. notch. Resonance - adjusts Q from ?mild to wild?. VCF slider controls filter from 100Hz to 20kHz. Channels have individual VCF on buttons with blue led. VCF can also be modulated by a low frequency oscillator with performance controls. DRSTM presets allow store and recall of 4 VCF performance settings including Channel on, VCF type, LFO on and LFO X2 LFO with Tap Tempo - Low Frequency Oscillator. Modulates VCF. Tap Tempo button allows the speed of the LFO to be set to the track. X2 switch doubles the speed. On switch activates the LFO and allows VCF slider to control depth Engineer / DJ's Toolbox - High powered headphone output with level. Booth output on [TRS] with level. 12 segment 3 colour bar metering displays mix. Channels have 4 segment 3 colour bar meter. Channel cue / main mix fader adjusts headphone monitor to suit. Cue switches are interlocked / auto cancel PSU - High performance internal switched-mode power supply. Universal mains input voltage TECHNICAL DESCRIPTION Connections - Inputs: Turntable: RCA phono RIAA Equalisation 47 ohm 2 to 100mV Line: RCA phono >15k ohms -15 to +10 dBu MIC: XLR <2k ohms -45 to -20 dB Return (link) RCA phono 10k ohm -10dBV Outputs:: Main OUT: TRS jack Balanced <75 ohm Aux OUT: TRS jack Impedance balanced <75 ohm Booth: TRS jack Impedance balanced <75 ohm Headphones Tip = L Ring = R 30 to 600 ohm 75 ohm recommended Maximum output level MAIN OUT +24dBu into >2K ohm load Aux/Booth +20dBu into >2K ohm REC OUT +15dBu into >10K ohm Internal headroom Channels +21dBu Mix to output +23dBu Peak indicators meters: Turn on 12dB before clipping Meters MAIN / MONITOR Peak hold 12 LED 3 color CHANNEL Peak reading 4 LED 3 color Frequency response: 10Hz-30kHz 0/-1dB Distortion THD+noise measured at +10dBu 1kHz: <0.02% Crosstalk channel shutoff measured at 1kHz: <90dB Noise: measured rms 22Hz to 22kHz MIC EIN -126dB referred to 150 ohm source Residual output noise: -100dBu Mix noise: -87dBu (-87dB S/N) Power Supply: Internal switch mode power unit with auto sensing mains input. MAINS IN socket IEC 3 pin Power lead Country dependent with moulded mains plug supplied AC mains 100 to 240V AC @ 50/60Hz Consumption 30W max Mains fuse rating 100-240V AC T500mA 20mm Dimension (W x H x D): 258 x 360 x 90mm (10.2 x 14.2 x 3.5 in) Weight: 4.5kg / 9.9lb OdBu = 0.775 Volts rms +4dBu = 1.23V rms OdBu = 1 Volt rms -10dBV = 316mV rms |
|
Hire From £14.00 Per Day |
Copyright(c) 2004 allthekit.com All rights reserved.
Contact@allthekit.com