top of page

AKG C2000B

AKG C2000B
  • Dry Hire - £18.00 + VAT per day

This is a wonderful mic which can be used either for live or studio work. It comes with a shockmount.

One of the basic rules of recording is that the quality of the recorded signal is determined by the weakest link in the signal chain. Today, any microphone needs to match the high quality of 24-bit recording media.

Therefore, one of the most important requirements for the AKG C2000B was high sensitivity. This allows you to lay clean, noise-free tracks with no risk of noise levels from many individual tracks combining in the mix. Its high SPL capability makes the AKG C2000B a highly versatile microphone that can be used even for extremely loud instruments.

The AKG C2000B will give perfect results for demo recordings, in the rehearsal room, as well as in the best recording studios.

Features:

  • Switchable bass rolloff filter for eliminating proximity effect

  • 10dB preattenuation pad, so that the microphone can be adjusted to all recording or live miking situations

  • Built-in pop screen reducing unwanted noise

  • Rugged construction, elegantly styled die-cast metal housing, and silver-gray finish

  • Hard Carry Case

  • AKG C2000 Cradle Suspension.

  • Ideal multitrack recording "workhorse" thanks to very low self noise

  • Cardioid polar pattern for multiplicity of applications

  • Exceptionally smooth frequency response

Specifications:

  • Frequency Range: 30 Hz to 20 kHz

  • Polar Patterns: cardioid

  • Preattenuation: -10 dB, switchable

  • Basscut Filter: 6 dB/octave below 500 Hz

  • Sensitivity: 20 mV/Pa (-34dBV)

  • Impedance: 200 ohms

  • Recommended Load Impedance: 1000 ohms

  • Equivalent Noise Level: 20 dB-A

  • Signal/Noise Ratio (A-Weighted): 74 dB

  • Maximum SPL for 0.5% THD: 140 / 150 dB (values for 48 V phantom power; reduce by dB for 24 V and 6 dB for 12 V phantom power)

  • Power Requirement: 9 - 52 V phantom power to DIN 45596

  • Connector: 3-pin male XLR

  • Finish: silver grey

  • Current Consumption: approx. 2 mA

  • Size: 53 Ø x 159 mm (2.1 Ø x 6.3 in.)

  • Net/Shipping Weight: 325/950 g (11.5 oz. /2.1 lbs.)

bottom of page